Din Rail Mount 240w Power Supply

DIN RAIL MOUNT 240W POWER SUPPLY

Product: RPS240
  • Supports 90 - 264 VAC / 127 - 370 VDC
  • Power factor > 0.95 @ full load over entire input range
  • Protection against short circuit, overload, overvoltage & over temperature
  • Cooling by free air convection
  • UL 508 approved (E522848)
  • Efficiencies up to 93 %
  • DC OK Relay contact

BRIEF SPECIFICATIONS

Input Voltage 90 - 264 VAC (127 - 370 VDC)
Input Frequency 50/60 Hz
Inrush Current < 48 Amps; Measured at 264 VAC, 25°C Ambient, Cold start
Output Voltage 12V to 48V
Output Power 240 W
Voltage Tolerance ± 1 %
Line Regulation < 1% of Vout
Load Regulation ± 1 %
Turn On Time < 1 sec @ 230 VAC & < 3 sec @ 115 VAC, Full load
Hold Up Time ≥60ms at 230V AC & ≥15ms at 115V AC, Full load
Rise Time < 100 ms
Overload Protection > 110% of rated output current; Hiccup type; Autorecovery
Overvoltage Protection Latched type; Input AC power to be recycled to recover the power supply
Output Short Circuit Protection Hiccup mode when output is shorted; Autorecovery type
Operating Temperature - 25°C to + 70°C; De-rate linearly above 50°C from 100 % load at 50°C to 50 % load at 70°C,- 25°C to 0°C start-up is guaranteed with specification deviation
Storage Temperature - 40°C to + 85°C
Cooling Natural convection cooled
Humidity 5 to 95 % RH, Non condensing
Altitude 2000 m
Dimension 50 x 136 x 135 mm (W x H x D)
Weight 645 gms
Mounting 35 mm Din rail

Product Variants

Product Code Description Certification
RPS240-12-CU 216W, 12V/18A DIN rail mounted Power Supply in Plastic Housing CE,UL
RPS240-24-CU 240W, 24V/10A DIN rail mounted Power Supply in Plastic Housing CE,UL
RPS240-48-CU 240W, 48V/5A DIN rail mounted Power Supply in Plastic Housing CE,UL
whatsapp