OPS 150W Series

OPS 150W SERIES

Product: OPS2x4-150
  • 4 x 2 x 1.16 Inches Form factor
  • 150 Watts Convection
  • No Load Power < 0.5 W
  • - 40°C to + 70°C operating temperature
  • Efficiencies upto 93%
  • Class II Option Available
  • Medical (BF) Safety Approvals
  • Approved to Household, ITAV & Medical Standards

BRIEF SPECIFICATIONS

Input Voltage 90 - 264 VAC (127 - 370 VDC)
Note : 90-305 VAC Opearation Available on demand
Input Frequency 47 - 63 Hz
Inrush Current < 60 Amps; Measured at 264 VAC, 25°C Ambient, Cold start
Output Voltage 12 V to 48 V
Output Power 150 W
Voltage Tolerance ± 1 %
Line Regulation ± 0.5 %
Load Regulation ± 1 %
Turn On Time < 2 sec at Full load
Hold Up Time > 20 msec at convection load & > 10 msec at full load for nominal Vout
Rise Time < 100 msec
Overload Protection 110% of rated output current; Hiccup type ; Autorecovery
Output Short Circuit Protection Hiccup mode when output is shorted; Autorecovery type
Operating Temperature -40°C to +70°C; De-rate linearly above 50°C from 100% load at 50°C to 50% load at 70°C
Note : Only start up guaranteed at -40°C with spec deterioration.
Storage Temperature - 40°C to + 85°C
Cooling Natural convection cooled or Forced Air Cooled
Humidity 5 to 95 % RH, Non condensing
Altitude 2000 m
Dimension Overall : 4'' x 2'' x 1.34'' (LxWxH) ; Height above PCB : 1.18''
Weight < 180 gms
Mounting Open Frame

Product Variants

Product Code Description Certification
OPS2x4-150-12-A-1-CU Open Frame Power Supply with 4 x 2 x 1.34 Form factor, 12 V 12.5 A, 150 Watts with Forced Air Cooling & 12 V 9.17 A, 110 Watts Convection Cooling -
whatsapp